Welcome to the Toshiba Support Forum, created for customers and enthusiasts to share knowledge, solve problems and discuss technology. To join the discussion, please login or register.
Results 1 to 3 of 3

Thread: Satellite C660D-1D3 blank screen after bios update

  1. Satellite C660D-1D3 blank screen after bios update
    #1
    Beginner
    Join Date
    Dec 2017
    Location
    Ελλάδ
    Posts
    5
    Hi.

    Finally fixed the blank screen after bios updated to 1.60 ,but without crisdisk because never worked.

    TOOLS

    1) https://www.ebay.com/sch/i.html?_fro...Board&_sacat=0

    2) http://www.mediafire.com/file/9paazd...0C660D-1YE.zip

    INSTUCTIONS

    -Disassemply the laptop and disconect motherboard from case

    -Find bios chip named [/B]WINBOND W25Q16BV

    (photo 1)
    Click image for larger version. 

Name:	Bios Chip W25Q16BV.jpg 
Views:	59 
Size:	238.0 KB 
ID:	735


    -Downlload tools from mediafire
    -Unzip downloaded folder
    -Unzip "CH341A-programmer-software" folder and install usb drivers from "DRIVERS" folder.
    -Open CH341A.exe with admin rights
    -Please see this photo carefully before connect "usb programmer" to the laptop usb.Click image for larger version. 

Name:	SOIC8 Clip On-Board.jpg 
Views:	60 
Size:	217.1 KB 
ID:	734
    -Connect "Usb Programmer" to usb laptop and the "Clip" to bios chip on the motherboard ( please see again the (photo 1)
    -If you installed the drivers the "CH341A.exe"when you open, on the right bottom corner it says "device 0 connected"
    -If you have connected all then click "dedect" button.Then select" W25Q16BV"and click ok.Then CH341A programm read you bios chip (if you not connect with the right way you get an error)
    -Click "open" button and select "bios.rom"from unzipped folder you have downloaded before.
    -Finally click "auto" button and flashing bios wil begin.If all done success you get a message "chip and buffer are same"
    -Disconect clip from the bios and test your laptop again.

  2. Re: Satellite C660D-1D3 blank screen after bios update
    #2
    OMG THANK YOU!!!

    I have spent about 5h looking for different BIOS Versions and alternative flash Methods with the common recommendation to use wincrisis 1.0.0.4 when the Update is bricked. Nothing worked. Now I came across your instructioni and by accident I happend to have the exact USB Flash tool which I bought for something else from ebay but never used. IT WORKED. This was my very last attempt before throwing the Laptop away.

    So in short: Confirmed for Toshiba Satellite C660D-18C Part PSC1YE. The Original Toshiba Bios v1.60 now works!

    I will add to this later but first I wanted to thank you for this great instruction!
    Last edited by HansWithoutBios; 10.04.2018 at 16:49. Reason: -

  3. Re: Satellite C660D-1D3 blank screen after bios update
    #3
    Beginner
    Join Date
    Dec 2017
    Location
    Ελλάδ
    Posts
    5
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •