13.12.2011, 14:29
Change HDD in Qosmio X770-107
Beginner
Hello,
ive bought the X770-107, and i want to change the First HDD, but i dont know how to remove the first HDD..
A Cable is over the first HDD leading to the 2nd HDD Controller.
I want to change it, with a SSD 160 GB .. Does somebody know, if i can remove the two screws over the 2nd HDD Controller to remove the First HDD??
Sry, my english is a little bit rusted.
14.12.2011, 15:08
Re: Change HDD in Qosmio X770-107
Master
Hi
As far as I know before removing the main HDD you have to remove the 2nd HDD which is placed near the CD/DVD drive.
After removing the HDD cover at the bottom of the unit, you can remove the 2nd HDD by pulling the tab attached to the HDD.
To remove the main HDD, you have to remove the HDD board firstly.
The HDD board is secured by one screw.
After the screw has been removed, you should be able to remove the HDD board.
Then remove the main HDD by pulling the tab attached to the HDD.
But be very very careful… and don’t use force in any case.
02.02.2012, 16:52
Re: Change HDD in Qosmio X770-107
Beginner
Hi i wrote a guide - but in German. Use the Pics to see what comming up to you!
German Toshiba Forum
http://www.toshiba-forum.de/qosmio-forum/2990-x770-ssd-hdd-umbau-anleitung.html
Any questions /translating feel free 2 contact me!
Kind Regards
Christian